Tramfloc® Hydroseeding and Erosion Control Polymers

Tramsorb

Tramsorb is a linear polyacrylamide polymer that electrochemically binds soil particles and other constituents of any hydroseeding or hydromulching system together to provide easier pumping, superior soil stabilization, increased water penetration and better germination.

Tramsorb is dissolved in water then spray-applied to the surface to be seeded. It will penetrate into the soil. Within a few hours, it will cause the soil particles to bind together and form a stabilized layer on top of the soil. As a result, all wetted particles such as seeds, soil conditioners, and fertilizer become bound to the surface. The stabilized layer of the soil remains absolutely water permeable and the soil biology is not impaired.

By keeping the soil in place, by protecting against wind, water and water erosion, and keeping fertilizer in place and available to the plant, Tramsorb creates an ideal environment for seed germination.

Tramsorb replaces the guar gum once used in this application. It took 40-60#/ac of guar gum whereas Tramsorb is applied at a rate of 3#/ac.

Tramsorb is environmentally safe, once root growth has taken place; Tramsorb is decomposed by the air and sunlight to environmentally harmless carbon dioxide and water.

Tramsorb is compatible with any paper or fiber mulches, fertilizers, surfactants or biostimulants.

Tramsorb products are the 1001, 1002 and 1009 formulations. Tramfloc® Erosion Control Polymers are the 1000, 1008, 1010, 1011, and 1012 formulations. The special Trambond Tablet for erosion control is Tramfloc® 1014.

Directions for use:

Introduce the appropriate amounts of Tramsorb into the Hydromulching mixing tank after all other components are added, agitate mixture thoroughly. The total amount of Tramsorb added to an area will vary depending on the area to be covered as shown in the table below and desired viscosity of the mix.

Application rates:
1,000 sq. ft 1 oz.
10,000 sq. ft 11 oz.
25,000 sq. ft 1 lb. 11 oz.
43,560 sq. ft ( 1 acre) 3 lbs.


Precautionary statement:

See the MSDS for these formulations shown available on this web site. Tramsorb exhibits a very low degree of toxicity. Few precautions are necessary when handling. Wash with soap and water after contact. Prolonged repeated skin contact may cause irritation/dry skin. Eye contact will cause irritation. Keep out of reach of children.


Spill clean up:

Tramsorb spills should be cleaned up without the use of water due to resulting slippery conditions. Thoroughly collect spilled granular material. Flush residuals to the drain with water for disposal at the local POTW.

Limit of liability:

These statements, including all descriptions of products and methods, test results and suggestions, are provided for determining the appropriate application of any products, method, or suggestions and for adoption of such precautions against damage. The information contained herein is not to be construed to constitute the permission, recommendation or encouragements of any use of application that may infringe any patents now or hereafter in existence. No warranty of merchantability or warranty of suitability of fitness for particular purposes is made by Tramfloc, Inc. No warrant, expressed or implied is made by Tramfloc, Inc. except as may be provided in the sales contract for the merchandise sold by Tramfloc, Inc.