Scales and Instruments: 150 lb. Cylinder Scales

Please scroll down to review the results of your search.

TRAMFLOC, INC.
P.O. Box 350 Tempe, AZ 85280-0350
Telephone: 480-491-6895 Fax: 480-456-1664
Toll Free: 800-613-6803
water@tramfloc.com

For Weighing Corrosive Materials
Capacities to 12,000 lbs.
Digital
Single & Multiple Cylinder Models
Low Profile Platform Design
Corrosion Resistant Construction
5 Year Warranty

Scaletron's 150 lb. Cylinder Scales are designed to accurately measure the weight of liquefied gases such as chlorine, sulfur dioxide, ammonia, hydrogen chloride and carbon dioxide packaged in cylinders.

MODEL 2305™ DIGITAL SINGLE CYLINDER SCALE

Solid - state operation by strain gauge transducer
Electronics housed in NEMA 4x, UL approved enclosure to provide protection from acids
Low profile platform design increases safety and ease of cylinder handling
Independent weighing platform with digital liquid crystal display
Standard readability to 0.1 pounds (kilograms)
High accuracy of ± 0.5% of capacity
Readout in pounds or kilograms
Indicator can be integral or remote mounted up to 200 feet (61 meters) away
Rugged steel construction protected by corrosion resistant finish, solid PVC decking
Measures weight of liquefied chlorine, sulfur dioxide, ammonia, hydrogen chloride, carbon dioxide and other liquid gases
Self-locking knob for adjusting tare weight
Output 4-20 mA signal for permanent recording,
standard on all indicators
Optional low level relay contacts
Model 1099™ Chemical Process Controller as optional indicator to create The Total Electronic System^{^SM}

The Model 2305™ Digital Cylinder Scale provides a means of measuring the weight of liquefied gas under pressure, in order to determine a cylinder's content level. It is intended for use in chlorination and other gas feeding applications. More specifically, the Model 2305™ can be used to weigh liquefied chlorine, sulfur dioxide, ammonia, hydrogen chloride, or carbon dioxide packaged in cylinders.

The scale combines solid-state operation with a highly functional design. It features a cylinder weighing platform and a liquid crystal display (LCD). The indicator can be mounted on the wall near the platform or remotely up to 200 feet (61 meters) away. The platform has an extremely low profile for increased safety and ease of cylinder handling. The LCD is large and readable to 0.1 lb (0.1 kg) from up to 10 feet (3 m) away.

The Model 2305™ plugs into a wall power source and operates on 120 or 240 VAC, 50/60 Hz. Gas cylinders are easily rolled onto the weighing platform and held in place by a restraining chain. As the gas in each cylinder is used, the LCD will continuously indicate the amount of gas remaining. The adjustable, self-locking knob is provided so the operator can reset the tare weight or set the known weight of 150 lbs (68 kg) per cylinder.

Capacity ranges for each platform are as follows:
Gross, 0-349 lbs(0-158 kg); Tare, 0-150 lbs (0-68 kg)
and Product, 0-199 lbs (0-90 kg).

For operation, the scale employs a temperature compensated strain gauge transducer. It offers high accuracy of ± .5% of capacity.

The Model 2305™ Digital Single Cylinder Scale has a durable base which is dry powder polyester plastic coated and covered with a PVC deck. The PVC decking provides a buffer between the metal frame and cylinders to protect the frame from scratches. A rugged PVC backstop positions the cylinder for accurate weighing. The 1.625" (41mm) ultra low profile platform provides added safety and ease of cylinder handling. Our solid UHMW pillow block bearings provide smooth scale operation and accurate readings. Display is housed in NEMA4x, UL approved enclosure for protection from harsh environments and to prolong life of scale.

The Model 1099™ Chemical Process Controller is also available on this base, which allows the user to combine different bases to create a customized Total Electronic System^SM. Please contact the factory for literature on the Model 1099™ Chemical Process Controller.

MODEL 2310™ DIGITAL SINGLE CYLINDER SCALE

Solid - state operation by strain gauge transducer
Electronics housed in NEMA 4x, UL approved enclosure to provide protection from acids
Low profile platform design increases safety and ease of cylinder handling
Independent weighing platform with digital liquid crystal display
Standard readability to 0.1 pounds (kilograms)
High accuracy of ± 0.5% of capacity
Readout in pounds or kilograms
Indicator can be integral or remote mounted up to 200 feet (61 meters) away
Rugged construction of corrosion resistant solid gray PVC
Measures weight of liquefied chlorine, sulfur dioxide, ammonia, hydrogen chloride, carbon dioxide and other liquid gases
Self-locking knob for adjusting tare weight
Output 4-20 mA signal for permanent recording, standard on all indicators
Optional low level relay contacts
Model 1099™ Chemical Process Controller as optional indicator to create The Total Electronic System^{^SM}
Patented

The Model 2310™ Digital Cylinder Scale provides a means of measuring the weight of liquefied gas under pressure, in order to determine a cylinder's content level. It is intended for use in chlorination and other gas feeding applications. More specifically, the Model 2310™ can be used to weigh liquefied chlorine, sulfur dioxide, ammonia, hydrogen chloride, or carbon dioxide packaged in cylinders.

The Model 2310™ plugs into a wall power source and operates on 120 or 240 VAC, 50/60 Hz. Gas cylinders are easily rolled onto the weighing platform and held in place by a restraining chain. As the gas in each cylinder is used, the LCD will continuously indicate the amount of gas remaining. The adjustable, self-locking knob is provided so the operator can reset the tare weight or set the known weight of 150 lbs (68 kg) per cylinder.

Capacity ranges for each platform are as follows:
Gross, 0-349 lbs(0-158 kg); Tare, 0-150 lbs (0-68 kg) and Product, 0-199 lbs (0-90 kg).

For operation, the scale employs a temperature compensated strain gauge transducer. It offers high accuracy of ± .5% of capacity.

The Model 2310™ has sturdy three point suspension and is built ruggedly for use in harsh environments. Scale base is made of corrosion resistant solid gray PVC. Display electronics are housed in NEMA 4x, UL approved enclosure to protect them from harsh environments and prolong life of scale.

MODEL 2330™ MECHANICAL DUAL CYLINDER SCALE

Mechanical spring and lever movement
Scale dials housed in molded fiberglass reinforced thermoplastic enclosure to protect them from acids
Low profile platform design increases safety and ease of cylinder handling
Two independent weighing platforms and independent dials
Standard readability to 0.5 pounds (kilograms)
High accuracy of ± 1% of capacity
Readout in pounds or kilograms
Corrosion resistant base of molded fiberglass reinforced thermoplastic construction
Stainless steel flexures and hardware with dry powder polyester plastic coated levers
Measures weight of liquefied chlorine, sulfur dioxide, ammonia, hydrogen chloride, carbon dioxide and other liquid gases
Knobs for adjusting tare weight

The Model 2330™ Mechanical Dual Cylinder Scale provides a means of measuring the weight of liquefied gas under pressure, in order to determine a cylinder's content level. It is intended for use in chlorination and other gas feeding applications. More specifically, the Model 2330™ can be used to weigh liquefied chlorine, sulfur dioxide, ammonia, hydrogen chloride, or carbon dioxide packaged in cylinders.

The scale sets the standard in corrosion resistance™ . It features two independent cylinder weighing platforms and two independent weight indications. The platforms have an extremely low profile for increased safety and ease of cylinder handling.

Gas cylinders are easily rolled onto two weighing platforms and held in place by two restraining chains. As the gas in each cylinder is used, dials will continuously indicate the amount of gas remaining.

Two adjustable, tare knobs are provided so the operator can adjust the tare weight and read the weight of gas only.

Capacity ranges for each platform are as follows:
Gross, 0-300 lbs. (0-130 kg); Tare, 0-150 lbs.
(0-68 kg) and Product, 0-150 lbs. (0-68 kg).

Each weighing platform of the Model 2330™ has sturdy three point suspension and is built ruggedly for use in harsh environments. Scale base is made of corrosion resistant molded fiberglass reinforced thermoplastic. The dial indicators for each cylinder are housed in a molded fiberglass reinforced thermoplastic box, and offer high accuracy of ± 1% of capacity.

All parts in base are stainless steel or are dry powder polyester plastic coated.

MODEL 2350™ DIGITAL DUAL CYLINDER SCALE

Solid - state operation by strain gauge transducer
Electronics housed in NEMA 4x, UL approved enclosure to provide protection from acids
Low profile platform design increases safety and ease of cylinder handling
Two independent weighing platforms and digital liquid crystal displays
Standard readability to 0.1 pounds (kilograms)
High accuracy of ± 0.5% of capacity
Readout in pounds or kilograms
Indicator can be integral or remote mounted up to 200 feet (61 meters) away
Corrosion resistant base of molded fiberglass reinforced thermoplastic construction
Measures weight of liquefied chlorine, sulfur
dioxide, ammonia, hydrogen chloride, carbon dioxide and other liquid gases
Self-locking knobs for adjusting tare weight
Output 4-20 mA signal for permanent recording
Optional low level relay contacts
Model 1099™ Chemical Process Controller as optional indicator to create The Total Electronic System^{^SM}
Patented

The Model 2350™ Digital Dual Cylinder Scale provides a means of measuring the weight of liquefied gas under pressure, in order to determine a cylinder's content level. It is intended for use in chlorination and other gas feeding applications. More specifically, the Model 2350™ can be used to weigh liquefied chlorine, sulfur dioxide, ammonia, hydrogen chloride, or carbon dioxide packaged in cylinders.

The scale combines solid-state operation with a highly functional design. It features two independent liquid crystal displays (LCDs). The latter can be provided as integral on the pedestal or separately for remote mounting up to 200 feet (61 meters) away. The platforms have an extremely low profile for increased safety and ease of cylinder handling. The LCDs are large and readable to 0.1 lb. (0.1 kg) from up to 10 feet (3 m) away.

The Model 2350™ plugs into a wall power source and operates on 120 or 240 VAC, 50/60 Hz. Gas cylinders are easily rolled onto two weighing platforms and held in place by two restraining chains. As the gas in each cylinder is used, the LCDs will continuously indicate the amount of gas remaining. Two adjustable, self-locking knobs are provided so the operator can pre-set the tare weight

Capacity ranges for each platform are as follows:
Gross, 0-349 lbs. (0-158 kg); Tare, 0-150 lbs. (0-68 kg) and Product, 0-199 lbs. (0-90 kg).

For operation, the scale employs temperature compensated strain gauge transducers. It offers high accuracy of ± 0.5% of capacity.

Each weighing platform of the Model 2350™ has sturdy three point suspension and is built ruggedly for use in harsh environments. Scale base is made of corrosion resistant molded fiberglass reinforced thermoplastic. Display electronics are housed in NEMA 4x, UL approved enclosure to provide protection from harsh environments and prolong life of scale.

All of our indicators can be calibrated in pounds or kilograms.

MODEL 2352™ - 2353™ DIGITAL MULTI CYLINDER SCALE

Designed to assist municipalities in meeting RMP regulations.

Solid - state operation by strain gauge transducer
Electronics housed in NEMA 4x, UL approved enclosure to provide protection from acids
Low profile platform design increases safety and ease of cylinder handling
Multiple independent weighing platforms and digital liquid crystal displays
Standard readability to 1 pound (kilogram)
High accuracy of ± 0.5% of capacity
Readout in pounds or kilograms

Indicators can be integral or remote mounted up to 200 feet (61 meters) away
Corrosion resistant base of molded fiberglass reinforced thermoplastic construction
Measures weight of liquefied chlorine, sulfur dioxide, ammonia, hydrogen chloride, carbon dioxide and other liquefied gases
Self-locking knobs for adjusting tare weight
Output 4-20 mA signal for permanent recording
Optional low level relay contacts
Patented

The Model 2352™ - 2353™ Digital Multi Cylinder Scale provides a means of measuring the weight of liquefied gas under pressure in order to determine a cylinder's content level. It is intended for use in chlorination and other gas feeding applications. More specifically, the Model 2352™ – 2353™ can be used to weigh liquefied chlorine, sulfur dioxide, ammonia, hydrogen chloride, or carbon dioxide packaged
in cylinders.

The Model 2352™ – 2353™ plugs into a wall power source and operates on 120 or 240 VAC, 50/60 Hz. Gas cylinders are easily rolled onto weighing platforms and held in place by restraining chains. As the gas in each cylinder is used, the LCDs will continuously indicate the amount of gas remaining. Adjustable, self-locking knobs are provided so the operator can pre-set the tare weight or set the known weight of 150 lbs. (68 kg) per cylinder.

Capacity ranges for each platform are as follows:
Gross, 0-349 lbs. (0-158 kg); Tare, 0-150 lbs. (0-68 kg)
and Product, 0-199 lbs. (0-90 kg).

For operation, the scale employs temperature compensated strain gauge transducers. It offers high accuracy of ± 0.5% of capacity.

The Model 2352™ – 2353™ has sturdy three point suspension and is built ruggedly for use in harsh environments. Scale base is made of corrosion resistant molded fiberglass reinforced thermoplastic. Display electronics are housed in NEMA 4x, UL approved enclosure to provide protection from harsh environments and prolong life of scale.

MODEL 5305™ HYDRAULIC SINGLE CYLINDER SCALE

Dependable hydraulic load cell, virtually unaffected by corrosive environments
Wall mounted read-out dial
Ideally suited for use in Class 1 thru 3, Div. 1, Group A thru D environments, no electric needed
Low profile platform design increases safety and ease of cylinder handling
Standard readability 0.5 lb/kg
High accuracy of 1% of capacity
Readout in pounds or kilograms
Maintenance free UHMW pivot bearings
Rugged steel construction protected by corrosion resistant finish, solid PVC decking.
Measures weight of liquefied chlorine, sulfur dioxide, ammonia, hydrogen chloride, carbon dioxide, and other liquefied gases.

The Model 5305™ Hydraulic Cylinder Scale provides a means of measuring the weight of liquefied gas under pressure, in order to determine a cylinder’s content level. This scale is ideally suited for use in Class 1 thru 3, Division 1, Group A thru D environments because no electric power is used. It is intended for use in chlorination and other gas feeding applications. More specifically, the Model 5305 can be used to weigh liquefied chlorine, sulfur dioxide, ammonia, hydrogen chloride, or carbon dioxide packaged in cylinders.

For operation, this scale employs a hydraulic loadcell. It offers high accuracy of 1%of capacity. Capacity ranges for each platform are as follows:Gross, 0-300 lbs (0-136 kg).

The Model 5305™ Hydraulic Cylinder Scale has a durable base which is dry powder polyester plastic coated and covered with a PVC deck. The PVC deck provides a buffer between the metal frame and cylinders to protect the frame from scratches. A rugged PVC backstop positions the cylinder for accurateweighing.

The 1.75” (44 mm) ultra-low profile platform provides added safety and ease of cylinder handling. The 4½” dial
indicator is easy to read and provides tare weight adjustment. The indicator may be mounted in any convenient location; 8’ of plastic coated copper tubing is provided as standard.

Our UHMW pillow block bearings provide smooth scale operation and accurate readings, and require NO maintenance. Safety chains and sturdy wall bracket are
suppliedwith each scale.

MODEL 1099™ CHEMICAL PROCESS CONTROLLER

FEATURES

NEMA 4x, UL approved enclosure
One to four independent channels
Two displays: Large LED display (.56"h) to show numeric result; 2 line, 16 character LCD display, backlit for easy reading to display menu and functions
Keyboard is arranged with 20 keys: 10 function, and 10 numeric keys
Keyboard and display provide audible, tactile and visual confirmation
Power sources from 85 VAC to 265 VAC
Power and input/output cables are sealed with plastic strain relief

MENU OPTIONS:

Gross weight - Total including container for each or all scales
Net weight - Of contents for each or all scales
Daily usage - Amount used during previous day
Amount used - Amount used since container was full
Days until empty - At current feed rate
Feed rate - Current rate in pounds, kilograms, gallons, or liters, with a range of 99,999 maximum reading

The Scaletron™ Model 1099™ Chemical Process Controller is central to the Scaletron Industries, Ltd. “Total Electronic System” which provides more accurate scale weights and automated use reports of chemicals used in the treatment of municipal drinking and industrial water, as well as municipal and industrial wastewater treatment.

The Model 1099™ used in conjunction with Scaletron's electronic base scales will reduce or eliminate most of the problems associated with the use of water and wastewater treatment chemicals such as: under dosing, over dosing, need for round-the-clock monitoring, accurate record keeping requirements, worker safety, environmental concerns, and equipment deterioration due to a highly corrosive environment.

The Model 1099™ Chemical Process Controller provides an automated way of controlling the batching process of chemicals used to prepare day-tanks, such as pumping several chemicals into a tank mounted on a scale base and mixing them together prior to dosing the desired chemical solution into the water system.

Our Model 1099™ can operate 4 scales with 4 individual channels. It will monitor up to 4 groups of scales with each group using one channel for a total of 16 load cells. It is also capable of operating different types of scales (dual cylinder, drum, platform, ton) used in the same system provided that the number of load cells does not exceed 16.

The Model 1099™ comes standard with one loop powered 4-20 mA circuit for channel #1. Three additional circuits are available for channels #2 thru #4. A maximum of four set points can be assigned among the four channels.

The Model 1099™ will send all reporting information to a printer, recorder, or scada system and can provide permanent records of daily usage, amount used, days till empty, and the feed rate of four different scale bases, thereby preventing the system from running out of chemicals when the plant is unmanned. Set-point relays to control transfer and metering pumps can prevent over filling or under filling of day tanks. The unit can automatically regulate chemicals going into a tank, which is generally a safer and more accurate mode of operation. This reduces worker exposure and possible contact with chemicals.