TRAMFLOC, INC. P.O. Box 350 Tempe, AZ
85280-0350 Telephone: 480-491-6895 Fax: 480-456-1664 Toll Free: 800-613-6803 water@tramfloc.com
SODIUM BROMIDE
Description and Use
ADBROM 40 is an easy-to-use solution of sodium bromide. When activated by a chlorine source (such as gaseous chlorine or sodium hypochlorite), ADBROM 40 provides a cost effective way to treat industrial cooling waters using bromine chemistry
In practice, a wide range of factors can affect the treatment, including condition of the make-up water, system halogen demand, treatment objectives, sensitive equipment locations, and sample point locations. A wide range of sodium bromide-oxidant mole ratios am indicated on the label use directions. This range allows users to design treatment programs to fit specific applications.
The halogen residual (measured as mg/L Cl2) maintained in a treated system depends on the treatment objectives and the site NPDES permit requirements. Successful recirculating and once-through cooling water treatment programs have maintained a 0.4 - 1.3 halogen residual (measured as mg/L Cl2) for at least 4 hours in the treated water.
General Properities
Form
Liquid
Sodium Bromide
40
Inert Ingredients, %
60
Total Bromide Ion
310,000 ppm
pH
6.5-7.5
Specific Gravity
1.39-1.42
Total Hardness (Calcium, Magnesium)
<30 ppm
Freeze Point (First Crystal Formed)
-25 degrees F
Safety Precautions
A Material Safety Data Sheet containing detailed information about this product is available upon request.
ADBROM 40 is not flammable. However, in fires fueled by other materials, hydrogen bromide or bromine may be released. In case of fire, wear self-contained breathing apparatus.