Polymer Processing - Non-Silicone

Please scroll down to review the results of your search.

TRAMFLOC, INC.
P.O. Box 350 Tempe, AZ 85280-0350
Telephone: 480-491-6895 Fax: 480-456-1664
Toll Free: 800-613-6803
water@tramfloc.com

Foam Control Additives
Polymer Processing - Non-Silicone

Tramfloc® 1140PPNS: 100% active defoamer from a new generation of non-silicone synthetic organic defoamers created for the new waterborne polymer systems used in adhesives, coatings and inks. Highly effective at low usage levels. Does not contain mineral oil.

Tramfloc® 1141PPNS: Non-silicone defoamer that forms a stable emulsion. Effective in inks, coatings and adhesives based on synthetic latex polymers. Good tolerance for electrolytes.

Tramfloc® 1142PPNS: Nonionic, water dispersible defoamer for use in polymers, especially waterborne polyurethanes. Antifoam formulation consisting of highly refined emulsifiable mineral oils, silica derivatives and organic particulates. Causes no cratering or fisheyes.

Tramfloc® 1143PPNS: Effective nonionic defoamer and antifoam formulation of highly refined mineral oils and silica derivatives. Will not cause cratering or fisheyes. Highly compatible in most latex systems.

Tramfloc® 1144PPNS: 100% active, organic defoamer. High defoaming efficiency and good water dispersibility. Excellent compatibility with tints and colorants. Effective in most latex and copolymer systems.

Tramfloc® 1145PPNS: 100% active, non-silicone synthetic organic defoamer for water-based polymer products. Does not contain mineral oil. Uses a unique hydrophobe that minimizes and eliminates unwanted side effects such as film formation.

Tramfloc® 1146PPNS: 100% active, synthetic, organic, non-silicone, non-mineral oil defoamer. Contains no petroleum oils and will not cause swelling of rubber rollers or polymer print plates. Highly effective at low usage levels which makes it very cost-effective. Will not produce side effects such as loss of adhesion, incompatibility, orange peel or fisheyes.

Tramfloc® 1147PPNS: General-purpose antifoam and defoamer formulated especially for polymers used in latex paints and coatings systems. Especially effective in styrene-butadiene, acrylic and polyvinyl acetate systems.

Tramfloc® 1148PPNS: Third generation non-silicone synthetic antifoam. Developed to impart long-term solution stability in acrylic, styrenated acrylic and acrylic copolymer systems.

Tramfloc® 1149PPNS: 100% active semi-synthetic non-silicone defoamer. Outstanding persistence and compatibility in EVAC/acrylic copolymer systems.

Tramfloc® 1150PPNS: 100% active non-silicone synthetic defoamer. Very efficient at low usage levels. Provides superior leveling.

Last updated November, 2008