Filtration Sands

antifoam coagulants dechlorination
drilling fluids emulsion breaker flocculants metals
phosphates polymer feeder polymers super absorbant
  tablets wastewater  
View Our Mobile Friendly Version From Anywhere

TRAMFLOC, INC.
P.O. Box 350   Tempe, AZ   85280-0350
Telephone: 480-491-6895     Fax: 480-456-1664
Toll Free: 800-613-6803
water@tramfloc.com
Filtration Sands

Typical Analysis
U.S. Sieve Sizes - Percent Retained

4/10 8/12 8/16 12/20 16/30 20/40 30/70

Sieve

%

Sieve

%

Sieve

%

Sieve

%

Sieve

%

Sieve

%

Sieve

%

4 0.0 6 0.0 6 0.0 8 0.0 12 0.0 16 0.0 30 0.5
6 7.6 8 4.5 8 3.0 12 3.2 16 1.1 20 2.0 40 41.6
7 22.3 10 51.7 12 61.9 16 55.0 20 64.5 30 51.0 50 45.2
8 45.1 12 38.3 14 26.0 18 26.0 25 25.0 35 33.0 60 6.5
10 21.9 14 5.0 16 6.3 20 12.5 30 8.0 40 11.4 70 3.0
12 2.6 16 0.4 20 2.3 30 3.1 40 1.3 50 2.5 100 2.0
Pan 0.5 Pan 0.1 Pan 0.5 Pan 0.2 Pan 0.1 Pan 0.1 Pan 1.2
100% 100% 100% 100% 100% 100% 100%
US 1.50 US 1.50 US 1.50 US 1.50 US 1.40 US 1.50 US 1.50
ES 2.10-2.25MM ES 1.70-2.00MM ES 1.39-1.42MM ES 0.92-0.95MM ES 0.74-0.77MM ES 0.45-0.48MM ES 0.20-0.35MM
  • Ultimate uniform filter media sand, for economical liquid/solid separation/water wells.
  • Highest quality silica sand; inert; odorless, pure, natural and without flat elongated grains. Free of silts, clays or organic impurities, virtually insoluble. Consistent uniformity in grain shape and size.
  • Will not impart taste, odor or color.
  • Meets or surpasses all AWWA recommendations for filter sand. (AWWA B 100-96)
  • Perfect for Swimming Pool filters
  • Ideal for Environmental Monitoring wells.

Classified by Underwriters Laboratories Inc. In Accordance With
Standard ASNI/NSF 61-1994

5N16
Drinking Water Systems Components

 
 

Typical Physical Properties

Mineral Quartz Hardness 7.0
pH Neutral (6.9 / 7.) Specific Gravity 2.65
Color Tan / White Melting Point 2800o / 3100o
Roundness 0.6+ LOI (Loss on Ignition) 0.1
Sphericity 0.6+ Unit Weights 1001lb = 1 Cubic Ft.
       
Typical Chemical Analysis
Si02 (Silicon Dioxide) 99.48 TiO2 (Titanium Dioxide) < 0.01
Fe2O3 (Iron Oxide) 0.06 CaO (Calcium Oxide) < 0.01
Al2O3 (Aluminum Oxide) 0.21 MgO (Magnesium Oxide) < 0.01

 

WARNING !!

CONTAINS FREE SILICA - DO NOT BREATHE DUST

NEVER USE FOR SANDBLASTING

This material contains fine silica dust. If you breathe in this dust you can suffer severe, irreversible lung damage and death. Some medical reports state inhalation of silica dust may cause lung cancer. Medical reports also link breathing silica dust to crippling arthritis and skin and eye irritation. NEVER USE THIS MATERIAL WITHOUT NIOSH/MSHA APPROVED RESPIRATORY PROTECTIVE EQUIPMENT.
(Federal laws that apply: 29CFR1910.134 29 CFR1910.94 AND 29 CFR 1910.1000) rev.10-97

[Section Divider]


[Home Page]

Last Updated April, 2013


Copyright ©1997-2013 Tramfloc, Inc.   All Rights Reserved.