* 200 tablets
per bottle *
Dissolves in 5-8 minutes
Bright Dyes
Yellow/Green products are specially formulated
versions of Xanthene dye, certified by NSF
International to ANSI/NSF Standard 60 for use in
drinking water. This dye is the traditional
fluorescent water tracing and leak detection
material and has been used for labeling studies
from the beginning of the century. It may be
detected visually, by UV light and by appropriate
fluoremetric equipment. Today it is most often used
visually. This dye has been used by the military to
mark downed pilots for search and rescue operations
over large water bodies. Visually the dye appears
yellow/green, depending on its concentration and
under UV light as lime green.
Based on
biochemical oxygen demand (BOD) studies, the dye is
biodegradable with 65% of the available oxygen
consumed in 7 days. The dye is resistant to
absorption on most suspended matter in fresh and
salt water. However, compared to Bright Dyes FWT
Red products it is significantly less resistant to
degradation by sunlight and when used in
fluoremetry, stands out much less clearly against
background fluorescence. As always the suitability
of these products for any specific application
should be evaluated by a qualified hydrologist or
other industry professional.
General
Properties
Tablets
Liquids
Powders
Detectability
of active ingredient 1
Visual
<100 ppb
Visual
<100 ppb
Visual
<100 ppb
Maximum
absorbance wavelength 2
490/520
nm
490/520
nm
490/520
nm
Appearance
Orange
convex 1.6cm diameter
Reddish-brown
aqueous solution
Orange
fine powder
NSF,
max use levels in potable
water
6.0
ppb
10.0
ppb
1.0
ppb
Weight
1.35
gms + 0.05
n/a
n/a
Dissolution
Time 3
95%
< 6 minutes
Immediately
50%
< 3 minutes 95% < 6
minutes
Specific
Gravity
n/a
1.05 +
0.05 @ 25f C
n/a
Viscosity
4
n/a
1.8
cps
n/a
pH
n/a
8.5 +
0.5 @ 25f C
n/a
Coverage
of Products
One
Tablet
One
Pint Liquid
One
Pound Powder
Light
Visual (100 ppb)
605
gallons
125,000
gallons
1,200,000
gallons
Strong
Visual (1 ppm)
60
gallons
12,500
gallons
120,000
gallons
Caution: These
products may cause irritation and/or staining if
allowed to come in contact wit the skin. The use of
gloves and goggles is recommended when handling
this product, as with any other dye or
chemical.
To our best
knowledge the information and recommendations
contained herein are accurate and reliable.
However, this information and our recommendations
are furnished without warranty, representation,
inducement, or license of any kind, including, but
not limited to the implied warranties and fitness
for a particular use or purpose. Customers are
encouraged to conduct their own tests and to read
the material safety data sheet carefully before
using.
Bright Dyes
Industrial Red products are specially formulated
versions of Rhodamine B, one of the traditional
fluorescent water tracing and leak detection
materials. It may be detected visually, by
ultraviolet light and by appropriate fluorometric
equipment. Visually the dye appears as a bright
dark red to magenta, depending on its concentration
and under ultraviolet light as a bright
orange.
Compared to
Bright Dyes FLT Yellow/Green or FWT Red products,
Industrial Red is significantly less resistant to
absorption on inorganic and organic suspended
matter. Thereby limiting its suitability in many
applications, particularly where fluorometric
detection is needed. This dye has greater
resistance to sunlight than FLT Yellow/Green and is
equivalent to FWT Red. Industrial Red products
should not be used: 1) In drinking water systems,
near drinking water intakes or where downstream
impingement on a drinking water system might occur,
or 2) Where any aquatic ecosystem might be
chronically exposed to detectable amounts of the
dye. The use and suitability of these products
should be evaluated by a qualified hydrologist or
other industry professional.
General
Properties
Tablets
Liquids
Powders
Detectability
of active ingredient 1
Visual
<100 ppb
Visual
<100 ppb
Visual
<100 ppb
Maximum
absorbance wavelength 2
550/588
nm
550/588
nm
550/588
nm
Appearance
Dark
maroon1.6cm diameter
Deep,
dark maroon aqueous solution
Dark
green fine powder
Weight
1.15
gms + 0.05
n/a
n/a
Dissolution
Time 3
50%
< 3
minutes 95%
< 6 minutes
Immediately
50%
< 3
minutes 95%
< 6 minutes
Specific
Gravity
n/a
1.05 +
0.05 @ 25f C
n/a
Viscosity
4
n/a
1.8
cps
n/a
pH
n/a
1.5 +
0.5 @ 25f C
n/a
Coverage
of Products
One
Tablet
One
Pint Liquid
One
Pound Powder
Light
Visual (100 ppb)
604
gallons
125,000
gallons
1,200,000
gallons
Strong
Visual (1 ppm)
60
gallons
12,500
gallons
120,000
gallons
Bright Dyes FWT
Red products are specially formulated versions of
Rhodamine WT dye for convenient use in water
tracing and leak detection studies. This bright,
fluorescent red dye is certified by NSF
International to ANSI/NSF Standard 60 for use in
drinking water. It may be detected visually, by
ultraviolet light and by appropriate fluorometric
equipment. Today it is most often used visually.
Visually the dye appears bright pink to red,
depending on its concentration and under
ultraviolet light as bright orange.
The dye is
resistant to absorption on most suspended mater in
fresh and salt water. Compared to Bright Dyes FLT
Yellow/Green products it is significantly more
resistant to degradation by sunlight and when used
in fluorometry, stands out much more clearly
against background fluorescence. As always the use
and suitability of these products for any specific
application should be evaluated by a qualified
hydrologist or other industry professional.
General
Properties
Tablets
Liquids
Powders
Detectability
of active ingredient 1
Visual
<100 ppb
Visual
<100 ppb
Visual
<100 ppb
Maximum
absorbance wavelength 2
550/588
nm
550/588
nm
550/588
nm
Appearance
Dark
red convex 1.6cm diameter
Clear,
dark red aqueous solution
Dark
red fine powder
NSF,
max use levels in potable
water
0.3
ppb
0.8
ppb
0.1
ppb
Weight
1.05
gms + 0.05
n/a
n/a
Dissolution
Time 3
50%
< 3
minutes 95%
< 6 minutes
Immediately
50%
< 3
minutes 95%
< 6 minutes
Specific
Gravity
n/a
1.03 +
0.05 @ 25f C
n/a
Viscosity
4
n/a
1.8
cps
n/a
pH
n/a
8.7 +
0.5 @ 25f C
n/a
Coverage
of Products
One
Tablet
One
Pint Liquid (FWT Red 25)
One
Pound Powder
Light
Visual (100 ppb)
604
gallons
62,500
gallons
604,000
gallons
Strong
Visual (1 ppm)
60
gallons
6,250
gallons
60,400
gallons
Bright Dyes
Standard Blue products are specially formulated
versions of the dye Acid Blue 9. This dye is used
for visual detection only and cannot be seen under
ultraviolet light or detected by fluorometry.
However, when used visually, its color is often
thought to be more acceptable to public view than
the fluorescing red or yellow green Bright Dyes
products. In this respect, it is sometimes used in
fountains, ponds and streams for decorative effect.
Visually, the dye appears as aqua to royal blue
depending on its concentration and activity of the
water.
Based on
biochemical oxygen demand (BOD) studies, the dye is
biodegradable with 77% of the available oxygen
consumed in 7 days. Bright Dyes Standard Blue
products have been certified by NSF International
to the ANSI/NSF Standard 60 for use in drinking
water at specific levels. As always the suitability
of these products for any specific application
should be evaluated by a qualified hydrologist or
other industry professional.
General
Properties
Tablets
Liquids
Powders
Detectability
of active ingredient 1
Visual
<100 ppb
Visual
<100 ppb
Visual
<100 ppb
Maximum
absorbance wavelength 2
630
nm
630
nm
630
nm
Appearance
Lt.
Blue speckled 1.6cm diameter
Clear,
dark blue aqueous solution
Deep
violet fine powder
NSF,
max use levels in potable
water
2000
ppb
1200
ppb
100
ppb
Weight
1.25
gms + 0.05
n/a
n/a
Dissolution
Time 3
50%
< 3
minutes 95%
< 6 minutes
Immediately
50%
< 3
minutes 95%
< 6 minutes
Specific
Gravity
n/a
1.04 +
0.03 @ 25f C
n/a
Viscosity
4
n/a
1.8
cps
n/a
pH
n/a
5.2 +
1.0 @ 25f C
n/a
Coverage
of Products
One
Tablet
One
Pint Liquid
One
Pound Powder
Light
Visual (100 ppb)
200
gallons
152,000
gallons
1,200,000
gallons
Strong
Visual (1 ppm)
20
gallons
125,000
gallons
120,000
gallons
Bright Dyes FLT
Blue products are specially formulated versions of
food grade dye FD & C Blue. Bright Dyes FLT
Blue products have been certified by NSF
International to the ANSI/NSF Standard 60 for use
in drinking water. This dye is used for visual
detection only and cannot be seen under ultraviolet
light or detected by fluorometry. However, when
used visually, its color is often thought to be
more acceptable to public view than the fluorescing
red or yellow green Bright Dyes products. In this
respect, it is sometimes used in fountains, ponds
and streams for decorative effect. Visually, the
dye appears as aqua to royal blue depending on its
concentration and activity of the water.
Based on
biochemical oxygen demand (BOD) studies, the dye is
biodegradable with 77% of the available oxygen
consumed in 7 days. As always the suitability of
these products for any specific application should
be evaluated by a qualified hydrologist or other
industry professional.